[. . . ] [. . . ] Slide DooDad®, coupling ring, and reducing adapter onto the cable in the order and orientation shown. Outer Jacket STEP 5 Solder tip to center conductor here Solder braid to connector body here STEP 2 Connector Body ¾" Prepare the cable according to the dimensions shown above. 3 (See Tech Note) Screw the connector body tightly onto the reducing adapter and solder the tip to the center conductor. Screw the coupling ring on, and slide the DooDad® Cable Strain Relief snugly onto the rear of the completed connector. /8" STEP 3 1 /8" TECH NOTE If you prefer a complete solder installation, do not use the metal washer or Teflon spacer. At Step 5, solder the tip, and then solder the braid to the connector body through the four small holes in the connector body. Complete the installation as described above. 35-90-1261-00 Finished connector, showing cutaway view of DooDad® in place 5 /8" Shakespeare Electronic Products Group 200 Business Park Blvd. [. . . ] [. . . ]